#3DPrinted Macro LED Ring Light #celebratephotography

0
3
from #3DPrinted Macro LED Ring Light #celebratephotography
by Stephanie

NewImage

From mikelduke on Thingiverse:

I created an LED Ring Light for macro photography. This press fits on to the Olympus 30mm Macro Micro4/3 lens.

It is meant to add light for close up photos where a flash won’t reach. Using one, you can take photos at night like the flower shown above or just add more light. Adding more light is helpful so you can lower the ISO for less noisy images, or raise shutter speed to allow for hand held shots in lower light, or stop down the aperture to get more in focus. The light also helps to reduce shadows.

The ring has an inner diameter of 55.2mm which is just large enough to fit on the metal ring at the end of the lens. The battery fits in a small case that mounts to the hotshoe flash mount on top of the camera.

See more


“Photofooter”

We #celebratephotography here at Adafruit every Saturday. From photographers of all levels to projects you have made or those that inspire you to make, we’re on it! Got a tip? Well, send it in!

If you’re interested in making your own project and need some gear, we’ve got you covered. Be sure to check out our Raspberry Pi accessories and our DIY cameras.



#3DPrinted Macro LED Ring Light #celebratephotography